DDL Dome Light Series

The DDL Dome Light Series are designed to read code and imperfections on rounded or highly reflective products and product inspection with an even, uniform, and repeatable light intensity. The DDL Dome Lights feature our Multi-Drive™ controller and built-in driver.



The Multi-Drive™ controller combines the Constant ON operation and OverDrive Strobe (high pulse operation) into one easy to use product. The Multi-Drive™ controller allows the user to run the product in Constant ON operation or pulse/strobe the light at the maximum allowed intensity by the LED manufacturer by simply setting the product parameters. The built-in Multi-Drive™ also protects the LEDs from premature degradation and failure caused by excessive heat by regulating the current delivered to the LEDs and limiting the duty cycle of the light.

DDL Dome Light Series Advantages:

• - Multi Drive
• - Closed in cover
• - Easy mounting with T-slots on all flat sides
• - Multi-Drive™ = Constant On + OverDrive Strobe in 1 light
• - Driver built in - No external wiring to driver

DDL-100 - Dome Light

The DDL-100 Series is a diffuse 4” dome light. The 20 LED design and the constant current regulation the built in driver provides along with the semi-reflective white dome further backs the DDL-100 light’s performance. The DDL-100 was designed with simplicity and functionality in mind. Built in constant ON operation and OverDrive Strobe technology allows for use in either operation depending on wiring method. NPN and PNP strobe operation with a built in 0-10VDC analog intensity control allows for further versatility. The industry standard 5-pin M12 connector makes for easy installation.

• - 5 Pin M12 Quick Disconnect
• - Driver built in – No External wiring to a driver
• - NPN or PNP Signal Options
• - Analog Intensity 0-10VDC Signal
• - 100mm Dome Diameter
• - 25mm Camera Viewing Hole
• - Continuous Operation or OverDrive Mode
• - Easy mounting with 6 T-slots

DDL-150 - Dome Light

The DDL-150 Series is a diffuse 6” dome light. The 40 LED design and the constant current regulation the built in driver provides along with the semi-reflective white dome further backs the DDL-150 light’s performance. The DDL-150 was designed with simplicity and functionality in mind. Built in constant ON operation and OverDrive Strobe technology allows for use in either operation depending on wiring method. NPN and PNP strobe operation with a built in 0-10VDC analog intensity control allows for further versatility. The industry standard 5-pin M12 connector makes for easy installation.

• - 5 Pin M12 Quick Disconnect
• - Driver built in – No External wiring to a driver
• - NPN or PNP Signal Options
• - Analog Intensity 0-10VDC Signal
• - 150mm Dome Diameter
• - 30mm Camera Viewing Hole
• - Continuous Operation or OverDrive Mode
• - Easy mounting with 9 T-slots

DDL-250 - Dome Light

The DDL-250 Series is a diffuse 10” dome light. The 60 LED design and the constant current regulation the built in driver provides along with the semi-reflective white dome further backs the DDL-250 light’s performance. The DDL-250 was designed with simplicity and functionality in mind. Built in constant ON operation and OverDrive Strobe technology allows for use in either operation depending on wiring method. NPN and PNP strobe operation with a built in 0-10VDC analog intensity control allows for further versatility. The industry standard 5-pin M12 connector makes for easy installation.

• - 5 Pin M12 Quick Disconnect
• - Driver built in – No External wiring to a driver
• - NPN or PNP Signal Options
• - Analog Intensity 0-10VDC Signal
• - 250mm Dome Diameter
• - 40mm Camera Viewing Hole
• - Continuous Operation or OverDrive Mode
• - Easy mounting with 14 T-slots