If you want to go fast, you need a large, sensitive camera that can convert light into signals. The HS-2.0 camera contains the Alexima LUX19HS sensor and at 20V/lux-sec, it is over 3 times as sensitive as its competition.

500 FPS HD PERFORMANCE

Using a global shutter, the HS 2.0 achieves 500 Frames/second with 8-bit pixels or 400 frames/second using 10-bit pixels. Even faster rates are achieved for smaller Regions of Interest.

10 GIG ETHERNET, FIBER OR COPPER

The cameras SFP+ connection allows for both copper and fiber interfaces. This enables long cable runs using low-cost Ethernet cabling, switches, and network interfaces. This saves over $2500 as no frame grabber is required.

SPECIFICATIONS(MONOCHROME/COLOR)

• Resolution 2 Mpix
• Active pixels 1920 x 1080px
• Interface 10 GigE Vision (SFP+)
• Frame rate (8 bit) 500 fps (fullframe)
• Sensor LUX19HS
• Sensor type CMOS global shutter
• Sensorformat 4/3’’
• Active sensor area (H x V) 17.50 x 11.80 mm
• Pixel size 10 x 10 µm
• Sensitivity (mono) 20 V/lux*s@550 nm
• Pixel data width 10 / 8 bit
• Dynamic range 60 dB
• Shutter time (steps) 1 µs
• Shutter time (range) 2 µs -1 s
• Max. Triggerfrequency 300 kHz
• Max.Jitter via CXP Trigger +/- 4 ns
• Mount options C-Mount / F-Mount
• Input/Output
• Camera Control Trigger In/ Strobe Out
• General Purpose 3 GPIO Signals
• Dimensions (W x H x L w/o mount) 80 x 80 x 53 mm
• Weight (C-Mount) 450 g
• Power consumption 13 W
• Power supply 12 - 24 VDC
• Camera body temperature +5 °C to +50 °C
• Shock / Vibration proof 70 g / 7 grms
• Conformity GenICam / CE / RoHS

Frame rates

• Resolution - Frame rate
• 1920 x 1080 px 500 fps
• 1280 x 864 px 625 fps
• 1,024 x 768 px 703 fps
• 640 x 480 px 1125 fps
• 128 x 128 px 4220 fps